Utax P-4030DN Manuel d'utilisateur télécharger pdf (Page 168)

Operation Panel

4-108

SecurityPassword (Change the Security Password)

Change the Security Password.

1 In the SSD Initializ. menu, press  or  to select Security

Passwd.

2 Press [OK]. The New Password entry screen appears.

3 Enter the new Security Password using the numeric keys.

4 Press [OK]. The Confirm Password entry screen appears.

5 To confirm, re-enter the security password to be registered. Enter the

new Security Password using the numeric keys.

6 Press [OK]. If the Security Password entered matches then the

password is changed to the new password and the SSD

Initializ. menu reappears.

If the password does not match, Incorrect password is displayed

and the New Password entry screen reappears. Enter again from

the new Security Password.

Initialization (Initialize on optional SSD)

Overwrite all the data stored in the optional SSD (HD-6) when disposing of the printer.

1 In the SSD Initializ. menu, press  or  to select

Initialization.

2 Press [OK]. A confirmation message is displayed.

3 Press [Yes] ([Left Select]). The printer automatically restarts and

then initialization starts.

If you do not wish to initialize, press [No] ([Right Select]). The SSD

Initializ. menu reappears.

New Password:

ABC

[ Text ]

Note The Security Password must be between 6 and 16

characters. For details on entering characters, refer to

Character Entry Method on page A-2.

Confirm Password:

ABC

[ Text ]

IMPORTANT If you accidentally turn the power switch off during initialization, the HD-6 might possibly crash or

initialization might fail.

System Initialization

will start.

Are you sure?

[ Yes ] [ No ]

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 311 312

Pas de commentaire

Utax P-4030DN Manuel d'utilisateur Page 168