Utax P-C3570DN Manuel d'utilisateur Page 210

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 255
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 209
Maintenance 5-5
3 Put the old toner container in the plastic bag (contained in the toner
kit) and discard it later according to the local code or regulations for
waste disposal.
4 Take the new toner container out of the toner kit.
5 Shake the new toner container 5 or 6 times as shown in the figure in
order to distribute the toner evenly inside the container.
Do not press too firmly on the center of the toner container or touch
the toner feed slot.
6 Set the new toner container in the printer as shown in the figure.
7 Push down on the top of the toner container to install it firmly in place.
Use the same procedure to replace the other color toner containers.
8
Close the top cover (top tray).
Proceed to the next section.
Note If the top cover (top tray) does not close, check that the
new toner container is installed correctly (in step 7).
After use, always dispose of the toner container and the
waste toner box in accordance with Federal, State and Local
rules and regulations.
Plastic Bag
Toner Feed Slot
Vue de la page 209
1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 254 255

Commentaires sur ces manuels

Pas de commentaire